Amoy Coace Plastic Technology Co.,Ltd
Add:No.131 Xifu Road, Tong'an District, Xiamen City,China
Contact us:Micheal li
Properties of thermoplastic plastics, and the appearance is light yellow powder or ball, nontoxic, odorless, relative density 1.02~1.08, softening temperature not less than 90 ° c, melting temperature 217~237℃, thermal decomposition temperatures above 250 degrees centigrade. This product is water, inorganic salts, acid and alkali-resistant, insoluble in most alcohols and hydrocarbons, soluble in acetone, benzene, ethylene dichloride and chloroform. UV aging, weathering a bit poor. Flammable.
Usage and characteristics of this product is used as impact modifiers for PVC, enhanced effect on impact strength and tensile strength decreased very little. Normal dosage for weight of plastic 5%~20%. Because this product contains unsaturated structures, poor weather, do not apply to products used outdoors for a long time. This product is also used as a fast-curing structural adhesive of modified acrylic ester plasticizer.
- Impact Resistance Modifiers
- Impact Resistance Modifiers Charact...
- Acrylic Impact Modifiers
- Methyl Methacrylate-butadiene-styre...
- Chlorinated Polyethylene
- Ethylene-vinyl Acetate Copolymer
- SBS Thermoplastic Elastomer
- Acrylonitrile-butadiene Rubber
- Acrylate-styrene-acrylonitrile Copo...
- Ethylene-propylene-diene Rubber
- Impact Modifier Has Good Toughness ...
- Low-temperature Impact Modifier Imp...
- Impact Modifier What Are The Charac...
- Compatibilizer Thermal Storage Stab...